| Tweet |
Custom Search
|
|
|
||
 TB 600-1
*5.
Why is it dangerous to smoke or use an open flame when servicing the battery?
a.
A battery generates hydrogen, a highly explosive gas.
b.
Heat causes a battery to discharge.
c.
Smoke and heat cause the electrolyte level to dry rapidly.
*6.
Use extreme care when working near the load terminals because.
a.
They contain high voltage.
b.
They require a large wrench to tighten properly.
c.
They must be connected in sequence from top to bottom.
Part II INSTALLING
*1.
What are the factors to consider when selecting a site for a generator?
a.
Distance to loads, TMs, access to fuel supply.
b.
Distance to loads, TMs, ventilation and mounting.
c.
Distance to loads, access, fuel supply, ventilation, foundation and mounting.
*2.
Why must the generator set be positioned as close as possible to the load?
a.
To reduce the time it takes the operator to check the generator during operation.
b.
To reduce transmission line voltage losses.
c.
To keep the equipment from overheating.
3.
What item is used to turn the fuel supply off or to select between an auxiliary fuel source and the fuel can (set tank)?
a.
Fuel hose connector.
b.
Fuel selector valve.
c.
Fuel tank valve.
Change 3 H-21
|
||
|
||
