| Tweet |
Custom Search
|
|
|
||
 TB 600-1
PASS
FAIL
*10.
Ground Generator Set. Connect one end of a ground cable not less than No. 6
____
____
AWG to the generator set ground terminal and tighten nut securely.
*a.
Connect the drive coupling to the first section of ground rod and drive the
first section of ground rod into the ground far enough so that the second
____
____
section can be connected and driven into the ground. Remove drive
coupling.
*b.
Connect the second section of ground rod to the first ground rod using an
adapter, connect the drive coupling to the second section and drive the
second section of ground rod into the ground far enough so that the third
____
____
and final section can be attached and driven into the ground. Remove drive
coupling.
*c.
Slide the ground clamp over the third section of ground rod. Connect the
drive coupling to the third section of ground rod and connect the third
____
____
section into the ground, leaving not more than one foot extending above the
ground.
*d.
Connect the other end of the ground cable to the ground clamp and tighten
____
____
the bolt securely.
____
____
*11.
Smoking. No smoking or open flame during the entire test.
*12.
Jewelry. All jewelry will be removed. (Wedding bands and hard to remove rings
may be taped.)
____
____
*13.
Fire Extinguisher. A fire extinguisher will be placed near the generator
set site.
____
____
Change 3 H-42
|
||
|
||
