INSTALL RIBBON CARTRIDGE

Custom Search

INSTALL RIBBON CARTRIDGE

TM-11-5895-1847-12-P LCU 2000 Global Maritime Distress and Safety System (GMDSS) LSV (1915-01-153-8801) LCU 2000 (1905-01-154-1191) Manual

SET SERIAL BOARD SWITCHES

0021 00

TM 11-5895-1847-12&P

With the knob side up, tilt the ribbon cartridge (12) onto the printhead plate so that it slides into the area of the

plate that is closest to the front of the serial printer.

NOTE

If the ribbon will not load easily, turn the blue knob slightly until the X-shaped notch on the

bottom of the ribbon cartridge aligns with the X-shaped insert on the ribbon plate.

Lower the ribbon shield over the printhead (8), aligning the tabs with the inserts on the printhead plate.

NOTE

Do not remove the clear plastic ribbon shield from the ribbon cartridge.

Press on the cartridge (12) until it snaps into place.

Install serial printer access cover (5).

2C021-2

0021 00 4