Custom Search
 
  
 
TM 5-1940-277-10
TM 1940-10/1
OPERATING INSTRUCTIONS
Section I. DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS
NOTE
For instructions on launching and retrieving the Bridge Erection Boat refer to TM 5-2090-202-12&P.
CAUTION
The reverse position is used only to clean debris from the grille and is not to be used to control the boat.
2-1. The TRANSMISSION CONTROL is a dual lever action control located to the left of the steering wheel. The
left lever controls the port transmission and the right lever controls the starboard transmission. Pushing the
levers all the way forward engages the transmission to drive the hydrojet units so that water is ejected through
the nozzles at the back of the boat. Putting the levers upright disengages the transmission. Pulling the levers all
the way back engages the transmission to drive the hydrojet units but in a reverse direction so that water enters
the nozzles and is ejected through the intake grilles at the bottom of the boat. The reverse position is used only
to dean debris from the grille and is not to be used to control the boat These levers should be placed in only
three positions: all the way forward, all the way back, or in the center. There are stops at these positions.


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business