| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-10
TM 1940-10/1
FRESH WATER COOLANT LEVEL
WARNING
If cooling system is hot, open coolant filler cap slowly until all
pressure is gone. Do not touch the hot cap with your bare hand.
Never take the cap off while the engine is overheated. Allow it to
cool down first.
MK2 W/ SABRE 5.95 LITER
MK2 W/ CUMMINS 6BT 5.9 LITER
Remove the filler cap (1) and check the level of coolant in the header. You should see coolant approximately
one inch (2.5 cm) below the bottom of the filler neck. Add coolant to fill the header if the coolant level is low.
NOTE
Normally the fresh water coolant (MK 1 and MK2 W/ Sabre 5.95
Liter) will stabilize at this level, and it should not be necessary to top
off frequently. If it does become necessary to frequently add coolant,
report it to organizational maintenance.
Change 3
3-17
|
||
|
||
