SCOOP CONTROL HEAD ASSEMBLY REPAIR INSTRUCTIONS

Custom Search

REMOVE

TM-5-1940-277-20 Boat Bridge Erection Twin Jet Aluminum Hull MODEL USCSBMK1 (1940-01-105-5728) MODEL USCSBMK2 (1940-01-218-9165) Manual

LEVER REPAIR

TM 5-1940-277-20

TM 1940-20/2

3-31. SCOOP CONTROL HEAD ASSEMBLY REPAIR INSTRUCTIONS

TOOLS: Flat Tip Screwdriver

10 mm Open End Wrench

PARTS/MATERIALS: Lever

Lever Knob

Control Head Housing

PERSONNEL REQUIRED: Two

Set master switch to "OFF".

HOUSING REPAIR:

REMOVE:

Open access panel under control console (refer to paragraph 3-154).

Using screwdriver and 10 mm open end wrench remove four screws (1), washers (2) and nuts (3) securing hous-

ing (4) to console and remove housing (4).

INSTALL:

Position new housing (4).

Using screwdriver and 10 mm open end wrench install four screws (1), washers (2) and nuts (3) securing housing (4)

to console.

Close access panel under console.

3-56