| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
Using Allen wrench loosen three socket head screws (3), unlocking crank (4).
5.
6.
Move scoop (5) by hand until pivot nut (6) comes in contact with cast stop (7).
7.
Using wrench loosen locking nuts (8 and 9) on rotary control rod (10) located inboard of transom).
Using wrench on fixed nut (11) turn control rod (10) to lengthen or shorten rod as required until crank (4) is approxi-
8.
mately horizontal in 9 o'clock position.
Using Allen wrench tighten three socket head screws (3), locking crank (4).
9.
3-69
|
||
|
||
