| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
3-41. ENGINE STOP CONTROL CABLE REPLACEMENT INSTRUCTIONS MK1 AND
MK2 W/SABRE
TOOLS: Two 9/16 inch Open End Wrenches
11 mm Open End Wrench
8 mm Open End Wrench
Flat Tip Screwdriver, 4 inch
10 mm Open End Wrench
PARTS/MATERIALS: Morse Teleflex Engine Stop Cable (22'3")
Two feet, Solid Wire (Recommend 18 Gauge Wire)
PERSONNEL REQUIRED: Two
CAUTION
The cable should not be bent sharply in any direction. Severe
cable damage may result.
REMOVE:
1.
Open and secure engine hatches (refer to parapaph 3-154).
2.
Using screwdriver remove two screws (1) and engine stop cable clamp (2).
3.
Using 8 mm wrench on screw (3) and 10 mm wrench to hold control arm (4) remove cable
wire (5) from shutoff control (6).
3-84
Change 2
|
||
|
||
