Custom Search
 
  
 
TM 5-1940-277-20
TM 1940-20/2
10.
Open and secure hydrojet hatches (refer to paragraph 3-154).
Using 9/16 inch wrench and socket remove nut (17), two washers (18), bolt (19), spacer (20) and spacer (21).
11.
12.
Using 112 inch and 13 mm box wrenches remove two nuts (22), two washers (23), and two bolts (24). Remove damp
(28).
Using 7/16 inch wrench and screwdriver remove two nuts (25), two washers (26), two bolts (27) and damp (28).
13.
14.
Using 9/16 inch wrench and socket remove nut (29), washer (30), bolt (31) and cable control yoke (32).
15.
Remove bushing (33), insert (34), cable adjustment sleeve (35) and damp spaces (36).
16.
Using two 7/16 inch wrenches loosen bolt (37) and nuts (38) securing cable stop (39).
17.
Remove cable stop (39).
18.
Remove aft cockpit (refer to paragraph 3-27).
19.
Remove part side buoyancy flotation material (refer to paragraph 3-152).
20.
Butt end of new cable (40) to end of old cable (41) (at stem). Wire cable ends together to form a secure bond (42).
21.
Using three people, pull new cable into position at steering control assembly.
22.
Unwire new cable (40) from old cable (41).
3-88


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business