| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
REMOVE:
1.
Open and secure engine hatches (refer to paragraph 3-154).
2.
Drain cooling system (refer to paragraph 69.1).
3.
Remove header tank (refer to paragraph 3-72.1).
4.
Remove drive belts (refer to paragraph 3-119.1).
5.
Using 1/2 inch socket, 6 inch extension and ratchet remove two bolts (4), water pump (2), and
seal (3) from engine block (1).
INSTALL:
1.
Using 1/2 inch socket, 6 inch extension and ratchet, install two bolts (4) securing water pump (2)
and seal (3) on engine block (1).
2.
Install drive belts (refer to paragraph 3-119.1).
3.
Install header tank (refer to paragraph 3-72.1).
4.
Fill cooling system (refer to paragraph 69.1).
5.
Close engine hatches.
3-154.1
Change 2
|
||
|
||
