| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
2.
Place shallow liquid container under oil filter element (2) to catch oil during removal.
3.
Using strap wrench remove oil filter element (2) and discard.
4.
Wipe up spilled oil and discard oil in container.
5.
Wipe oil from filter adapter (3) and ensure that no dirt falls into oil cooler (1) thru the filter
opening.
INSTALL
1.
Lightly coat new oil filter gasket and seat area on adapter (3) with clean engine oil.
2.
Screw new filter element (2) onto adapter (3) and hand tighten.
3.
Wipe up spilled oil from filter element (2) and oil cooler (1).
4.
Check oil level on dipstick (4) and add oil until level reaches FULL mark (5).
5.
Close engine hatches.
Change 2
3-165
|
||
|
||
