| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
REMOVE:
NOTE
The oil sump pump and brackets on both engines are replaced the
same way. This procedure covers the replacement of one oil sump
pump and bracket.
1.
Open and secure engine hatches (refer to paragraph 3-154)
2.
Remove two screws (2) securing oil sump pump (1) to mounting bracket (3).
3.
Remove oil sump pump (1) from mounting bracket (3).
4.
Remove adapter (4) from oil sump pump (1) and tee (5).
INSTALL:
1.
Apply coat of antiseize tape to both sides of adapter (4).
2.
Install adapter (4) on tee (5) and oil sump pump (1).
3.
Secure oil sump pump (1) on mounting bracket (3) with two screws (2). Tighten screws (2) to
18 ft-lb (24 Nm).
4.
Close engine hatches.
|
||
|
||
