| Tweet |
Custom Search
|
|
|
||
 TM 5-1940-277-20
TM 1940-20/2
4.
Using two 5/8 inch open end wrenches remove four bolts (7) and lock nuts (8) securing drive shaft coupling (9) to
transmission flange (10).
Using two 5/8 inch open end wrenches remove four bolts (11) and lock nuts (12) securing drive shaft coupling (13)
5.
to hydrojet flange (14).
6.
Remove drive shaft (15) with end couplings (9 and 13).
INSTALL:
1.
Replace drive shaft.
2.
Using two 5/8 inch open end wrenches reinstall four bolts (7) and lock nuts (8) securing drive shaft coupling (13)
to transmission flange (10).
Using two 5/8 inch open end wrenches reinstall four bolts (11) and lock nuts (12) securing drive shaft to hydrojet
3.
flange (14).
4.
Reinstall spacers (3) and collar (5).
Using two 10 mm box wrenches reinstall four bolts (4), washers (2) and nuts (1) securing drive shaft collar to support.
5.
6.
Reinstall aft cockpit (refer to paragraph 3-27).
3-300
|
||
|
||
