| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
7. Remove bolt and nut (16) from heat exchanger.
8. Remove bolt and nut (17) and holding bracket (18) from timing gear cover (6).
9. Remove expansion tank and heat exchanger (4) as a unit.
10. Install expansion tank and heat exchanger.
11. Install holding bracket (18) and bolt and nut (17) to timing gear cover (6).
12. Install bolt and nut (16) to heat exchanger.
13. Install hoses (14) and (15) to heat exchanger.
14. Install bolts (13) and junction block (12) to engine.
15. Install fuel lines (11) to junction block.
16. Install hoses (8, 9, and 10) to heat exchanger.
17. Tighten hose clamps.
18. Install screws (5) to front cover (6).
19. Add coolant (a fifty-fifty mixture of clean, fresh water and permanent anti-freeze) to expansion tank.
4-24
|
||
|
||
