| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
4-30. REPLACE MECHANICAL COVER ASSEMBLY
This Task Covers: a. Inspect
b. Replacement
INITIAL SETUP
Tools Required
Equipment Conditions
Tool Kit, General Mechanics
Engine Shutdown (para 2-11).
(Appendix B, Item 1)
Battery disconnected (para 4-58).
PCV lines removed (para 4-33).
Materials/Parts Required
Personnel Required
Cotton Rags (Appendix E,
1 person
Item 3)
Gasket P/N 9L8020
INSPECT
1. Inspect cover (3) for damage.
2. Inspect for loose bolts (2).
REPLACEMENT
1. Loosen hose clamp (1).
2. Remove hose (4).
3. Remove bolts (2) from cover (3).
4. Remove cover (3).
5. Remove gasket (5).
6. Replace with new gasket.
7. Install cover (3) on block.
NOTE
Tighten bolts (2) in the sequence illustrated in Figure 4-18.
8. Install bolts (2) and tighten to 10 lb-ft.
4-45
|
||
|
||
