| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
NOTE
Put marks on the three housings (7, 5, and 1) prior to disassembly to
insure proper alignment at reassembly.
5.
Loosen "V" clamp (4) and (6).
6.
Remove cartridge housing (5) from turbine housing (1).
NOTE
Make sure all oil passages in turbocharger housing are clean and free
of dirt and foreign material.
NOTE
Make sure the marks on the housings are in alignment with each other.
NOTE
Put anti-seize compound on threads of "V"-clamp before installation.
7.
Install "V"-clamp and tighten to 120 lb-in.
8.
Install compressor housing onto the cartridge assembly.
9.
Install "V"-clamp and tighten to 120 lb-in.
10. Install gasket (3).
11. Install turbocharger assembly.
12. Install and tighten nuts and washers (2).
5-16
|
||
|
||
