| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
Gasket P/N 7C0939
Manifold P/N 8N1298
Gasket P/N 9L8786
Gasket P/N 9L8837
Filter Element P/N 7W5040
Gasket P/N 9L8020
Bolt P/N MS90728-43
Tappet P/N 9L6931
Bolt P/N MS90728-40
Rocker Arm P/N 2W8271
Washer P/N 2W6047
Screw P/N 5S5917
Nut P/N 9L7712
Washer P/N 9L8076
Shaft P/N 9L9315
Washer P/N 9M1974
Holder P/N 9N0141
Push Rod P/N 9N6500
Gasket P/N 9N5497
Gasket P/N 7C1599
Cylinder Head Assembly P/N 9N3600
REPAIR
Repair is limited to the replacement of defective parts.
REPLACEMENT
(Figure 5-16, 5-17)
CAUTION
Make sure fuel injection nozzles are removed before cylinder heads are
removed.
1.
Remove clamp (2) from water sleeves (1).
2.
Push water sleeves into timing gear cover (3).
3.
Remove bolts (4) and (5).
4.
Remove cylinder head (6).
5.
Compress valve springs (7).
6.
Remove locks (8).
7.
Remove retainer (9), spring (10), washer (11), and valve (12).
NOTE
Tag each valve to show which cylinder to reinstall into.
5-38
|
||
|
||
