| Tweet |
Custom Search
|
|
|
||
 TM 5-2010-205-14
NOTE
Insure all surfaces are clean before
reinstalling.
NOTE
Clean bore in cylinder head for the
water sleeves.
NOTE
Put lubricating oil on the water
seals.
17. Install cylinder head on cylinder block.
18. Put lubricating oil on bolt threads.
CAUTION
Refer to chart and see Figure 5-17.
before installing head bolts.
Figure 5-17. Head Bolt Locations
Location
Length
5, 2, 4, 10
5.25 in.
19, 20, 21
5.0 in.
16, 14, 12, 17
3.0 in.
7, 9, 3.1, 6, 8
4.75 in.
18, 11, 13, 15
2.25 in.
22
Stud
19. Install bolts and tighten accordingly:
a. Tighten bolts 1-18 in sequence to 60 lb.-ft.
b. Tighten bolts 1-18 in sequence to 110 lb.-ft.
c. Again, tighten bolts 1-18 in sequence to 110 lb.-ft.
d. Tighten bolts 19-22 in sequence to 32 lb.-ft.
20. Install water sleeve into cylinder head.
21. Install clamp (2) onto water sleeves.
5-41
|
||
|
||
