Custom Search
 
  
 
TM 5-2010-205-14
NOTE
Put marks on the three housings (7, 5, and 1) prior to disassembly to
insure proper alignment at reassembly.
5. Loosen "V" clamp (4) and (6).
6. Remove cartridge housing (5) from turbine housing (1).
NOTE
Make sure all oil passages in turbocharger housing are clean and free of
dirt and foreign material.
NOTE
Make sure the marks on the housings are in alignment with each other.
NOTE
Put anti-seize compound on threads of "V" clamp before installation.
7. Install "V" clamp (4) and tighten to 120 lb-in.
8. Install compressor housing (1) onto the cartridge assembly (5).
9. Install 'V" clamp (6) and tighten to 120 lb-in.
10. Install gasket (3).
11. Install turbocharger assembly.
12. Install and tighten nuts and washers (2).
6-5


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business