Custom Search
 
  
 
TM 5-2010-205-14
13. Install gasket (16).
14. Install timing gear cover (7).
15. Install bolts (14).
16. Push water sleeves (5) into cylinder head.
17. Install elbows (8) and (11).
18. Install elbows (6) and (9).
19. Install tachometer drive adapter (7).
20. Install water lines (6) and (9).
21. Install bolts (10).
22. Put sealing compound on outer metal surfaces of crankshaft front
seal.
NOTE
Lip of seal must be toward inside of engine.
23. Put seal (5) in position on end of crankshaft with installer.
24. Install washer (2) and bolt (3).
25. Tighten bolt until installer makes contact with crankshaft gear.
26. Put lubricating oil on lip of seal and sealing surfaces of crankshaft pulley.
27. Install pulley on end of crankshaft.
28. Use installer to seal pulley against crankshaft gear.
29. Remove installer.
30. Install washer (2) and bolt (3).
31. Tighten bolt (3) to 400 lb.-ft.
6-10


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business