Quantcast INTAKE MANIFOLD REMOVAL/INSTALLATION

Custom Search
 
  
 
TM 5-2805-261-13
5-7. INTAKE MANIFOLD REMOVAL/INSTALLATION
This task covers:
Removal/Installation/Inspection of intake manifold and leaf plate assembly
INITIAL SETUP :
Tools:
Equipment Condition:
Motor OFF
Materials/Parts:
As required
Personnel Required:
Approximate Time Required (minutes):
mechanic
100
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Carburetor
Remove.
2.
Cotter pin (1) and
Remove.
washer (2)
3.
Cam follower (3) and
Slide off shaft.
throttle lever (4)
4.
Springs (5) and (6)
Remove.
When sliding the cam follower off the shaft, hold
spring (5) in place.
5.
Cam follower (3)
Disengage from rod (7).
6.
Capscrews (8), (9),
Remove.
Capscrews are of three different lengths. Take
and (10)
notice of where each length goes.
7.
Intake manifold (11),
Remove.
and gasket (12)
8.
Capscrew (13)
Remove.
9.
Leaf plate assembly
Remove.
(14)
10. Gasket (15)
Remove.
11. Capscrew (16), nut (17)
Remove.
and lockwasher (18)
5-13


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.