| Tweet |
Custom Search
|
|
|
||
 TM 52805-261-13
LOCATION/ITEM
ACTION
REMARKS
5-14. GEARCASE DISASSEMBLY/ASSEMBLY - continued
4.
Pinion bearing assembly
Install.
(32)
5.
Pinion washer (31) and
Install.
thrust bearing (30)
6.
Pinion washer (29) and
Install.
Oil propeller shaft for easier assembly.
bearing (28)
CAUTION
Chamfer on pinion washer (29) must face pinion
gear (9).
Aline notches in clutch dog
shifter over the detent balls. If
they appear off-center, rotate
clutch dog 1800. The ma-
chined groove on the clutch
dog must face forward (away
from the propeller end) of
the shaft.
7.
Detent balls (17) and
Install in shaft (8) and hold
spring (18)
in position while sliding the
clutch dog shifter (13) onto
shaft and into place over
detent balls.
8.
Thrust washer (23) and
Install on shaft (8).
forward gear (11)
9.
Bearing (10)
Install.
10. Thrust washer (23) and
Install.
Figure 5-25. Clutch dog shifter and shaft
reverse gear (22)
11. Bushing (21) and thrust
Install.
washer (20)
12. Bearing (19)
Install.
13. Oil retainer (14),
Assemble and install on
housing (15), and
shaft.
O-ring (16)
14. Lower shift rod (26)
Position in shifter lever
(7) and secure with shift
rod pin (25) and cotter
pin (24). Place cradle
(6) on assembly.
5-56
|
||
|
||
