Quantcast Table 3-1 Operator/Crew Preventive Maintenance Checks and Services-Continued - TM-55-1905-217-120092

Custom Search
 
  
 
TM 55-1905-217-12
Table 3-1 Operator/Crew Preventive Maintenance Checks and Services-Continued
Landing Craft Mechanized Mod 0 and Mod 1
INTERVAL
Equipment will be reported
ITEM
B
D
A
M
Q
B/A Item to be inspected
Procedure
not ready (red) if:
3
Propeller and Pro-
Check for misaligned/bent pro-
Shaft is misaligned or
peller shaft
peller shaft and worn cutlass
bent, propeller blades are
bearings; stand on stern of vessel
bent or damaged or
while running free. Should the
cutlass
bearing  is ex-
vibration be above normal pro-
cessively worn.
peller and shaft will be inspected
by Marine divers.
4
Rudders and steer-
Inspect steering rams and linkage
Rudder is damaged to
existing system
for normal and safe operation
tent the steering is im-
Check for excessive play/damage
paired, to the extent that
to linkage and steering rams
rudder cannot be turned
Check for air or hydraulic leaks
freely through a 350 port
at pumps rams and attaching
and starboard arc.
lines. Check steering system
return line filter frequently.
Change filter if indicator is in red
area.
5
Life lines and
Ensure life lines are in good
Life lines are not in
stanchions
repair, and are secured in
place
place/available on board
Ensure safety chains are utilized
the vessel.
6
Keel coolers
Marine diver inspect for damage
Coolant is not evidenced
Vessel operating personnel check in expansion tank. Engine
for loss of engine coolant, and or
temperatures are above
abnormal high operating engine
normal Saline is evi
temperatures
denced in coolant.
7
S. W. Strainers
Check strainer for mud, sediment
Mufflers are leaking ex-
and other foreign materials. En-
haust fumes into engine
sure plastic cylinder, and screen
room due to mechanical
are clean and in good repair. En-
failure-burned
sure selector handle is functional
rubber boot.
8
.Anodes
Inspect anodes to see if
deteriora-
tion exist to the point that they
fail to provide adequate mass and
surface area. Maximum allowable
waste before replacement is fifty
percent. Marine diver is required
to perform this check.
9
Sea chest
Ensure sea chest openings are
Openings are restricted to
free of marine growth, and other
a degree normal operation
foreign bodies
is hampered 50% or more.
Change 2 3-6.1


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.