| Tweet |
Custom Search
|
|
|
||
 Figure 3-101. Cylinder block, disassembly and reassembly.
c. Cleaning, Inspection, and Repair.
(1) Clean all metal parts with cleaning solvent (FED. SPEC. PD-680), and dry thoroughly.
(2) Inspect for defective end plates, plugs and hardware. Inspect block for cracks and evidence of excessive wear.
(3) Replace defective parts as necessary.
(4) Replace all gaskets.
e. Installation. Install in reverse order of removal (a above).
Change 1
3-147
|
||
|
||
