| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-217-34P
Section I.
INTRODUCTION
1. Scope.
Indicates the manner of acquiring support items for
a. This manual lists repair parts, special tools, test
maintenance, repair, or overhaul of end items. Source
codes are entered in the first and second positions as
and support equipment required for the performance of
follows:
direct support, general support, and depot maintenance
of the landing craft.
Code
Definition
b. Repair parts listed represent those authorized for
PA
Item procured and stocked for anticipated or
use at indicated maintenance levels and will be
known usage.
requisitioned on an "as required" basis until stockage is
PB
Item procured and stocked for insurance
justified by demand in accordance with AR 710-2.
purposes because essentially dictates that a
2. General.
minimum quantity be available in the supply
system.
This repair parts and special tools list is divided into the
PC
Item procured and stocked and which otherwise
following sections:
would be coded PA except that it is
deteriorain nature.
authorized at the direct support, general support, and
PD
Support item, excluding support equipment,
depot levels for the performance of maintenance. The
procured for initial issue or outfitting and
list also includes parts which must be removed for the
stocked only for subsequent or additional
replacement of the authorized parts. Parts lists are
initial issue or outfittings. NOT subject to
composed of assembly groups in ascending numerical
automatic replenishment.
sequence, with parts in each group listed in figure and
PE
Support equipment procured and stocked for
item number sequence.
b. Special Tools, Test and Support Equipment -
initial issue or outfittings to specified
Section III. A list of special tools, test and support
maintenance repair activities.
PF
Support equipment which will not be stocked but
equipment authorized for the performance of
which will centrally procured on demand.
maintenance at the direct support, general support, and
PG
Item procured and stocked to provide for
depot level. (Not applicable).
c. Federal Stock Number and Reference Number
sustained support for life of the equipment. It
is applied to an item peculiar to the equipment
which, because of probably discontinuance or
sequence, of all Federal stock numbers appearing in the
shutdown of production facilities, would prove
listings, followed by a list, in alpha-numeric sequence, of
uneconomical to reproduce at a later date.
all reference numbers appearing in the listings. Federal
KD
An item of depot overhaul/repair kit and not
stock number and reference numbers are cross-
purchased separately.
referenced to each illustration figure and/or item number
KF
An item of a maintenance kit and not purchased
appearance.
separately.
KB
Item included in both a depot overhaul/repair kit
3. Explanation of Columns.
and a maintenance kit.
The following provides an explanation of columns found
MO
Item to be manufactured or fabricated at
in the tabulated listings in Section III.
organizational level.
a. Source, Maintenance, and Recoverability Codes
MF
Item to be manufactured or fabricated at direct
(SMR). The SMR code is a five letter code composed
support maintenance level.
of three parts consisting of a two (2) position source
MH
Item to be manufactured or fabricated at
code, a two (2) position maintenance code, and a one
general maintenance support level.
(1) position recoverability code. Support items listed in
MD
Item to be manufactured or fabricated at depot
this RPSTL assigned maintenance and recoverability
maintenance level.
codes and no source code can be requisitioned, with
AO
Item to be assembled at organizational level.
justification, through a normal supply channels by use of
the manufacturers code and part number. Such support
items are NOT normally stocked. (1) Source Code.
v
|
||
|
||
