Custom Search
 
  
 
TM 55-1905-219-14-10
5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-REASSEMBLY (Cont.)
2. Start the cup plug
straight in the bear-
ing bore in the hous-
ing, then support
the spring housing,
bearings and shaft
assembly on a sleeve
on the bed of an arbor
press and press the
cup plug in flush with
the outside face of
the housing.
i.
Spring
Place in vice.
Use soft jaws.
housing
(21)
j.
Set screw
1. Tighten to 12-15
(36)
lb-ft (16.3-20.3 N.m)
2. Stake the edge of the
spring lever set screw
hole with a small
center punch and hammer
to retain the set screw
in the lever.
k.
Plug (35)
Install.
l.
Seal ring
Install.
(49), and
plain
washer
(34)
m. Key (33),
1. Install
speed
control
2. Tighten screw.
lever
(32), and
screw (31)
5-214


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business