| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-10
5-8. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-DISASSEMBLY (Cont.)
2. Start the oil seal
straight into the bore
in the end plate with
the sealing edge facing
down (toward the
bearing bore) .
3. Place the short end
of all oil seal remover
and installer J6270-3
in the oil seal and
under the ram of the
press. Then, press
the oil seal into the
end plate until the
shoulder on the in-
staller contacts the
end plate.
5-237
|
||
|
||
