| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-71. .BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-ASSEMBLY (Cont)
NOTE
Gaskets are not used between end plates and
housing. The mating surfaces must be perfectly flat
and smooth.
3. Insert the screws
through the end
plate and thread
them into the hous-
ing. Tighten the
screws securely. Do
not use lockwashers
on these screws.
f.
Blower
1. Reverse the blower
housing
housing on the bench
(50),
(rear end of housing
and
facing the outside
rotors
of the bench).
(48 and
49)
2. Place rotors in mesh
with the omitted
serrations in the
rotor shafts in a
horizontal position
and facing to the
left as viewed from
the rear end.
5-994
|
||
|
||
