| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-72. FUEL INJECTOR - MAINTENANCE INSTRUCTIONS (Continued).
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - ASSEMBLY (Cont)
b. Stop
1. Place stop pin on in-
pin
jector body so that
(5),
the follower spring
and
rests on the narrow
follower
flange of the stop pin.
(4)
2. Align slot in follower
with the stop pin hole
in the injector body.
3. Align the flat side of
the plunger (7) with
the slot in follower.
4. Insert the free end of
the plunger in the
injector body.
5. Press down on the
follower and at the
same time press the
stop pin in position.
When in place, the
spring will hold the
stop pin in position.
5-1038
|
||
|
||
