| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-11
5-113. FLANKING RUDDER LIMIT SWITCH - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
ALIGNMENT
2.
a. PRELIMINARY:
Check that the limit switch arm
is parallel to tiller (with
rudder at midship), and that
connecting arm is perpendicular
to both.
b. LIMIT SWITCHES:
To set the limit switches,
it is necessary to move the
rudder. The convenient way
is to disconnect the internal
wiring on the limit switch
terminal board connections -
terminals 3 and 18 (insulate
the lugs as they will be
energized). Connect a single
pole - double throw - spring
centered switch (MS24523-27)
to the limit switch assembly.
c. Set flanking control on wheelhouse control panel
to MIDSHIP. Start flanking pump using local
start on motor starter. Move rudder positioning
spring-centered switch in either direction.
5-1282
|
||
|
||
