Custom Search
 
  
 
TM 55-1905-219-14-11
5-140. COMPRESSOR - HVAC - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL (Cont)
k.
Bushing
Make sure it is square Use a depth gage.
(69)
in bore.
l.
All
Apply oil liberally.
internal
parts
m. Idler
1. Reassemble.
(67),
rotor
2. Retorque.
Refer to h above.
(68),
gasket
(66),
cover
(65),
lock-
washers
(64)
and
screws
(63)
n. Pump
Check to see if pump
does not bind in oper-
ation.
NOTE
To check for proper clearance of oil pump bushing, grasp tang of oil pump shaft with a
pair of pliers and try to move it in or out. If any end play can be felt, bushing is not
properly positioned and there is too much clearance. If no axial movement is felt and if
oil pump shaft rotates freely without binding, position of oil pump bushing is correct.
o. Bearing
Install.
Refer to-step 12.
head (61)
14. Crank-
a. Seal and
Remove.
Refer to step 5.
shaft
main
and
bearing
5-1444


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business