| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-2
2-52.
BOW RAMP (Cont).
The following is an index to the procedures
DESCRIPTION
PARAGRAPH
Lowering Bow Ramp-Remote
Raising Bow Ramp-Remote
Lowering Bow Ramp-Local
Raising Bow Ramp-Local
2-53.
LOWERING BOW RAMP-REMOTE.
Remote operation from the pilothouse. To operate the winch and lower the bow ramp proceed as follows:
NOTE
Perform all before and daily operations on the Preventive Maintenance Checks and
Services Chart.
a.
Winch Compartment.
(1)
Remove pawl locking pin (1) and place pawl (2) in the disengaged position.
Pawl must be open
before winch is started.
(2)
Turn mechanical brake wheel (3) counter clockwise to unlock winch.
(3)
Place lever on disconnect switch (4) in the ON position.
(4)
Turn local/remote switch (5) to remote position on the local control switch.
(5)
Check that the hand crank (6) has been removed and hand crank switch (7) is locked in position for
electrical operation.
2-314
|
||
|
||
