| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-4
3-41. CRANKSHAFT BEARINGS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
11. Bearing
a. Bolts
Place a small quantity
Use Interna-
cap
(1)
of compound on threads
tional Compound
number
and the bolt head contact
#2 or equiva-
6
area.
lent.
b. Bearing
Position on crankshaft.
caps
(3)
c. Stabil-
Install.
Torque to 70-75
izers
lb-ft (94.9-101.7 Nm)
(10
and
11),
screws
(6)
and
flat
wash-
ers
(7)
d. Bolts
1.Install and draw up
(1) and
tight.
washers
(2)
2. Rap the bearing cap
To seat the
sharply with a soft
bearing caps.
hammer.
NOTE
If the bearings have been
installed properly, the
crankshaft will turn freely
with all of the main bear-
ing cap bolts drawn to the
specified torque.
12. Engine
a. Lube oil
Install.
Refer to para-
pump
b. Oil in
Install.
Refer to para-
let pipe
3-904
|
||
|
||
