| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-93.1. LUBE OIL PRESSURE REGULATOR - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
INSPECTION
Wear eye protection when using compressed air.
3.
a. Clean all parts in
fuel oil, dry with
compressed air.
b. Inspect all parts
for wear or damage.
REASSEMBLY
4.
a. Valve
Apply clean engine oil to
(10)
the outer surface of the
valve and slide the valve
into the regulator body,
closed end first.
b. Spring
Insert the spring in the
(9) and
valve and, while compres-
plug (8)
sing the spring, start
the plug into the body.
Tighten the plug.
INSTALLATION
5.
a. Gaskets
Remove all traces of the
old gaskets from the regu-
lator body, cylinder
block and pump outlet
pipe flange.
b. Gasket
Affix new gasket to regu-
(7)
lator body with oil pas-
sage holes in the gasket
in alignment with the oil
passages in the body.
c. Screws
Install.
(4) and
lockwash-
er (5)
3-1626
|
||
|
||
