| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-96.4. CYLINDER LINER - MAINTENANCE INSTRUCTIONS (Cont)
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION (Cont)
NOTE
The numbers on the side of the connecting rod and cap identify the
rod with the cap and indicate the particular cylinder in which they are
used. If a new service connecting rod is to be installed, the same
identification numbers must be stamped in the same location as on
the connecting rod that was replaced.
2. Push the piston and
connecting rod assembly
down into the
liner until the piston
is free of the ring compressor.
CAUTION
Do not force the piston into the liner. The peripheral abutment type
expanders apply considerably more force on the oil ring than the
standard expander. Therefore, extra care must be taken during the
loading operation to prevent ring breakage.
g.
Connec-
1.
Remove.
ting rod
cap and
2.
Push piston down until
ring com-
the compression rings
presser
pass the cylinder
liner ports.
3-1704
|
||
|
||
