| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-97.1. CRANKSHAFT BEARINGS (Cont).
LOCATION
ITEM
ACTION
REMARK
INSTALLATION (Cont)
5. Install.
Remove from
washer seats-
the slightest
particle of
dirt or burr
may decrease
the clearance
between washers
and crankshaft.
9. Lower
Lower
1. Clean.
bearing
bearing
number
shell
2. Lubricate.
Use clean en-
4
(12) and
gine oil.
thrust
washers
3. Inspect for burrs.
Remove from
(13)
washer seats-
the slightest
particle of
dirt or burr
may decrease
the clearance
between washers
and crankshaft.
10. Bearing
a. Bolts
Place a small quantity of
Use Interna-
caps
(1)
compound on threads and
tional Compound
numbers
the bolt head contact
#2 or equiva-
1 thru
area.
lent.
3
b. Bearing
Position on crankshaft.
caps (3)
NOTE
The main bearing caps are bored in position and stamped 1,2,3, etc. They must be
installed in their original positions in the cylinder block.
c. Bolts
1. Install and draw up
(1) and
tight.
lock-
washers
(2)
2. Rap the bearing cap
To seat the
sharply with a soft
bearing caps.
hammer.
3-1724
|
||
|
||
