| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-5
3-103. HYDROSTARTER PUMP (ENGINE-DRIVEN) - MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (Cont)
10.
Charging
a. Remove five capscrews
pump
(7) and lockwashers (8).
b. Remove charging pump (9)
from flywheel housing.
c. Remove gasket (10).
INSTALLATION
11. Engine
a. Charg-
a. Install gasket (10)
Use a new
driven
ing
and charging pump (9).
gasket. Use
pump
pump
Permatex #2
sealant on the
flywheel side
only.
b. Align the tangs on the
pump drive with the
slots in the drive
plate.
CAUTION
Do not force the pump into place. Use of force, or tightening the bolts when
the mounting flange is not against the flywheel housing, will force the drive
arm against the pump body and result in damage to the pump when the
engine is started.
c. Install five lock-
washers (8) and cap-
screws (7).
3-1786
|
||
|
||
