Custom Search
 
  
 
TM 55-1905-219-14-6
3-165.2. EXHAUST VALVE - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REMOVAL- CYLINDER HEAD OFF ENGINE (Cont)
b. Remove
1. Place collet of tool
valve
J6567 inside the valve
seat
seat insert so the
insert
bottom of the collet
(12)
is flush with the
bottom of the insert.
2. Hold the collet handle
and turn the T handle
to expand the collet
cone until the insert
is held securely by
the tool.
3. Insert the drive bar
of the tool through
the valve guide, and
tap the drive bar
once or twice to move
the insert about 1/16
inch (1.588 cm).
4. Turn the T handle to
loosen the collet cone
and move the tool into
the insert slightly so
that the narrow flange
at the bottom of the
collet is below the
valve seat insert.
5. Tighten the collet cone
and continue to drive
the insert out of the
cylinder head.
3-2812


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business