| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-219-14-8
4-7.4A. PUMP - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION
5. Pump body
a. Pump body
Install on frame.
(31)
b. Screws (9),
1. Install.
(10), and
shims
CAUTION;
Accurately install shims as recorded during disassembly.
2. Replace alignment
shims.
3. Tighten screws to
24 lb ft (32.5 Nm)
c. Body plug
Install.
and chain
(24)
NOTES
Apply a thin coat of silicone compound, MIL-S-8660, to bolt threads and
pump housing surface.
Apply a thin coat of pipe thread sealant to pipe threads, check valve, elbow,
nipple, cross, and pressure switch.
All pipe threads should engage 3/8 inch (9.5 mm).
d. Drain valve
Install.
(13)
e. Pipe nipple
Install.
(30)
f. Pipe cross
Install.
(29)
g. Pressure
Install.
switch (25)
4-324
|
||
|
||
