OVERHAUL-REASSEMBLY (Cont) - TM-55-1905-220-14-100211

Custom Search

OVERHAUL-REASSEMBLY (Cont)

TM-55-1905-220-14-10 Landing Craft Utility LCU 1671-1679 NSN 1905-01-009-1056 Manual

OVERHAUL-REASSEMBLY (Cont)

TM 55-1905-220-14-10

5-7. VARIABLE SPEED MECHANICAL GOVERNOR - MAINTENANCE INSTRUCTIONS (Continued).

LOCATION

ITEM

ACTION

REMARKS

OVERHAUL - REASSEMBLY (Cont)

3. Position the governor

weight and bearing

assembly between the

arms of the weight

carrier.

4. Push the weight pin

just through the

weight.

5. Insert a third flat

washer between the

inner face of the

carrier arm and the

weight and push the

pin through the

washer and the carrier

arm.

6. Install the fourth

flat washer over the

pin and against the

outside of the carrier

arm.

7. Install the second

lock ring in the

groove of the weight

pin.

8. Install the second

governor weight and

bearing assembly in

the carrier in the

same manner as

described above.

e. Governor

Slide on weight shaft

riser (59)

(55) and against the

fingers of the high

speed weight.

5-206