| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-8. BLOWER - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - DISASSEMBLY (Cont)
2. Support the outer face
of the end plate on
wood blocks on the bed
of an arbor press.
3. Place the long end of
the oil seal remover
and installer J6270-3
down through the oil
seal and into the
bearing, with the
opposite end of the
remover under the ram
of the press. Then,
press the bearing and
oil seal out of the
end plate.
Remove the remaining
bearings and oil seals
from the end plates in
the same manner.
5-232
|
||
|
||
