Custom Search
 
  
 
TM 55-1905-220-14-10
5-8. BLOWER-MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL-ASSEMBLY (Cont)
CAUTION
The horizontal oil passage in the top front face of the front end plate that intersects the
vertical oil passage is plugged. Do not install this end plate on the rear end of the blower
housing.
2. The front end plate
should be attached
to the front end of
the blower housing
first. The rear
end plate is attached
to the blower housing
after the rotors are
in place. Attach the
front end plate to
the blower housing
as follows:
c. Pipe plug
1. If removed, press a
Use teflon
(68), and
new oil strainer into
tape on pipe
oil strainer
the vertical oil
plug threads
(75)
passage at the bottom
on front
side of the end plate
blower only.
from flush to .015"
below bottom surface.
5-239


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business