| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-19.1. CAMSHAFT ASSEMBLY AND GEAR TRAIN - MAINTENANCE INSTRUCTIONS (Continued).
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (Cont)
c. Thrust
Slide off of each
washer
camshaft.
(25),
bushing
(26),
rear end
bearing
(27),
bushing
(28), and
thrust
washer (29)
d. Lockrings
Remove.
(30) , and
intermediate
halves (10
and 31)
e. Plugs (32
Remove the end plugs
Discard plugs.
and 33)
from each camshaft, to
facilitate the removal
of any foreign material
lodged behind the plugs,
as follows:
1. Clamp the camshaft
in a vise equipped
with soft jaws, being
careful not to damage
the cam lobes or
machined surfaces of
the shaft.
2. Make an indentation
in the center of the
camshaft end plug with
a 31/64" drill (carboloy
tip.
5-328
|
||
|
||
