| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-23. HYDROSTARTER - ENGINE DRIVEN PUMP - MAINTENANCE INSTRUCTIONS
(Continued).
LOCATION
ITEM
ACTION
REMARKS
OVERHAUL - DISASSEMBLY (Cont)
NOTE
Place scribe marks on the mounting plate and pump body prior
to disassembly to ensure their correct reassembly.
b. Pump
1. Remove four capscrews
housing
(7), lockwashers (8),
and nuts (9).
2. Remove retainer (10).
3. Remove oil seal (11).
Discard.
4. Remove capscrews (12),
and lockwashers (13)
from pump housing (14).
5. Remove pump housing
(14) from valve hous-
ing.
6. Remove packing (15).
Discard.
7. Remove bearing (16).
Check bearing
for wear, if
worn replace.
8. Remove washer (17).
9. Remove drive shaft
(18).
10. Remove bushing shaft
(19).
5-414
|
||
|
||
