| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-10
5-37. FRESH WATER PUMP-MAINTENANCE INSTRUCTIONS (Cont).
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)|
b. Slinger
Install the slinger on the
(14), and
pump shaft with the flange
shaft (15)
of the slinger approximately
3/16 inch from the end of
the outer race of the bearing.
c. Pump body
1. Support the impeller end of
(5)
the pump body on an arbor
press, and insert the cou-
pling end of the new shaft
and bearing assembly (9)
into the pump body.
2. Press against the outer
race of the bearing until
the bearing contacts the
shoulder in the pump body.
3. Stake the end of the pump
body in three places to
prevent the bearing from
moving endwise.
5-603
|
||
|
||
