REASSEMBLY (Cont) - TM-55-1905-220-14-100877

Custom Search

REASSEMBLY (Cont)

TM-55-1905-220-14-10 Landing Craft Utility LCU 1671-1679 NSN 1905-01-009-1056 Manual

REASSEMBLY (Cont)

TM 55-1905-220-14-10

5-66. TORQUE CONVERTER - ANCHOR WINCH - MAINTENANCE INSTRUCTIONS (Continued).

LOCATION

ITEM

ACTION

REMARKS

REASSEMBLY (Cont)

e. Compression

Place in grease filled

springs (61

counterbores.

and 96)

Nose pieces

1. Lubricate the skirt

(60 and 95)

with clean oil.

2. Invert and install

Exercise care

in seal carriers

in entering the

(66 and 101).

skirt of the

nose piece into

the lip of the

rubber element.

3. Line up the clip p

slots in the nose

piece with the clip

slots in the seal

carrier.

g. Clips (59

Compress the nose piece

and 94),

to the carrier and in-

and round

stall the two clips and

head screws

screws retaining nose

(58 and 93)

piece to the seal

carrier (66 and 101).

Check for free movement

of the noise piece (60

and 95) .

h. Seal carrier

1. Soak gasket briefly

Use new gasket.

(101),

in clean converter

assembled

fluid.

gasket seal

(102), and

2. Install. Make sure

turbine

holes line up pro-

housing (31)

perly with the

grease and seal drain

passages.

5-884