| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-11
6-6. ELASTOMERIC COMPENSATING WINCH - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
h. Shim (2)
1. Install the number of
shims required in
Figure 1.
2. Remove the inner
mounting assembly.
3. Place the additional
shim(s) over the dowels
at the bottom of the
drum.
i.
Tortional
1. Place the tortional
Spring (4)
spring (4) over the
cogs until clearance
holes in the end plate
of the tortional spring
fit over the dowel
pins.
2. Seat the end plate of
the tortional spring
against the shim.
j.
Dowels (8)
Press the dowels (8)
through the inner mounting
plate (5) 1.62 inches deep.
k.
Inner mounting
Place the inner mounting
plate (5)
plate (5) on top of the
tortional soring and rotate
it until the dowels seat
into the clearance holes
in the tortional spring(4).
l.
Bearing (6)
Install the bearing (6)
over the inner mounting
plate.
Change 1 6-36
|
||
|
||
