| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-11
6-6. ELASTOMERIC COMPENSATING WINCH - MAINTENANCE INSTRUCTIONS (Continued)
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (Cont)
m. Screws (9)
1. Tighten the screws (9)
opposite each other
until the bearing face
has seated on the
mounting surface.
2. Torque the screws to
30 ft-lbs.
n. Bushing (7)
Install the bushing (7)
over the output shaft of
gear box, chamfer end
first.
o. Set screws
Install and tighten set
(10)
screws (10) to 24 ft-lbs
after the bushing has
seated inside the outer
mounting plate.
NOTE
Refer to paragraphs 5-48, 5-49, 5-50 to reassemble winch drum to the speed
reducer and place bow ramp winch back into operation.
Change 1 6-37/(6-38 blank)
|
||
|
||
