| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-220-14-2
2-56.
LOWERING BOW RAMP - LOCAL (Cont).
The winch wire rope is capable of raising and lowering the ramp alone, but is not capable of supporting
the ramp during loading or unloading operations. Normally, the ramp will be supported on the forward
end and the cable and chain will be slack. If the ramp must be suspended from the chains, the chain
stopper must be set against the chain guide to
2-56.1 ADJUSTING UPWARD COMPENSATION - LOCAL.
a. For full upward compensation, push the "LOWER" control until slack is visible in the ramp chain.
b. Push the "RAISE" control until the slack is out of the ramp chain and the ramp is riding on the chain.
2-56.2 ADJUSTING DOWNWARD COMPENSATION - LOCAL.
a. For full downward compensation, push the "LOWER" control until the ramp chain is slack.
b. Push the "RAISE" control until the slack is eliminated. (The ramp should not be riding on the chain.)
Change 4
2-438
|
||
|
||
