If the temperature in step (35) exceeds 240 (115.6 C), do the following:

Custom Search

Check the following gages:

TM-55-1905-220-14-2 Landing Craft Unit LCU 1671-1679 (1905-01-009-1056) Manual

To place the dryer in use, proceed as follows:

TM 55-1905-220-14-2

2-112. AIR CONDITIONING SYSTEM START-UP (Cont).

(33)

Adjust flow control valve (25) to obtain required pressure.

(34)

Check the compressor discharge pressure gauge (26). The pressure should be 100 to 135 psi

(689.5 to 930.8 kPa).

(35)

Check the compressor discharge temperature (27). The temperatureshould not exceed 240

(115.6 ).

(36)

If the temperature in step (35) exceeds 240 (115.6 C), do the following:

(a)

Rotate heat exchanger liquid inlet shut-off valve (3) clockwise .

2-593